Flanged Sleeve Overview

Restricted Finish Float Spacer Form
The addition of plates restricts axial travel towards the drive or driven shaft. The spacer helps make it feasible to clear away the hubs from either shaft with out disturbing the connected units.
Vertical Floating Shaft Type
The decrease coupling has a hardened crowned button inserted within the plate on the reduce hub. The whole floating assembly rest about the button. Optional building with the upper coupling would be a rigid hub on the floating shaft by using a flex half about the top rated.
Vertical Kind
This coupling has the exact same horsepower, RPM and misalignment capabilities since the normal couplings of corresponding sizes. A plate using a hardened crowned button rests over the lower shaft which supports the fat in the sleeve.
Insulated Kind
Use of a non-metallic material among flanges and around the bolts prevents any stray currents from one particular shaft to the other.
Jordan Form
Utilized on Jordan machines and refiners, this style and design is comparable towards the slide sort coupling except the long hub is split and secured on the shaft having a bolt clamp. This permits brief axial adjustment on the Jordan shafts i this hub.
Engineered Shear Pin Sort
Shear pin couplings are mainly utilised to limit transmitted torque to a redetermined load. THis in turn disconnectes the driver and driven shafts if torque exceeds the specified limits. They can be in particular suited to guard gear when jams occur. Parts are re-useable right after pins shear. The coupling will retain lubricant for any short period to permit gear to be shut down.
Brakewheel and Brake Disc Type
Replaceable brakewheel and brake disc piloted about the outside diameter of a regular sleeve and/or rigid hub. Provides a decision of applying braking hard work towards the load or driving motor.
Double Engagement Half Gear Style
The two inner and external teeth in a single sleeve. May be bolted to a rotating flywheel, shaft or drum to connect driver or driven machine using a shaft extension. This coupling has the exact same options, ratings and misalignment capability as the regular group of couplings.
Rigid Alloy Steel FARR Kind
Male/Female piloted rigid coupling coupling with keeper plates. This coupling is applied when a rigid connection is required involving the low speed shaft of the gearbox as well as the head shaft of the conveyor, bucket elevator, mixer or any overhung or suspended load.